Select Country:
Home About Us Testimonials Links Contact Us
Step 1
Step 1 - Side Wall Sheets
Step 2
Step 2 - Fill with Silage
Step 3
Step 3 - Cover Silage with Silostop film
Step 4
Step 4 - Protect Silostop film
Step 5
Step 5 - Seal & Weight
Step 6
Step 6 - Feed out
Step 1 (Optional) Side Wall Sheets
Use Silostop film or regular plastic on side walls before filling to:

• ensure quality silage at shoulders
• ensure a good seal between top sheet and side walls
• divert water run-off away from silage
• protect side walls from damage

Photo courtesy of Dr L.Kung, University of Delaware Photo courtesy of Dr L.Kung, University of Delaware
Click to enlarge

Apply plastic to side wall
Use silage at foot of wall to hold plastic in place
Once filled, pull side wall plastic over silage before top plastic film

> Step 2 - Fill with Silage
Click to enlarge...

Silostop is 20x more effective at stopping oxygen than regular bunker covers...

"UNBELIEVABLE…AWESOME…This was the best sealed section of a large bunker I have ever seen in my life!"

Effect of Silostop on oxygen flow - Michigan State University

Effect of Silostop on oxygen flow
Manufactured with different raw materials from regular plastic for silage covering, Silostop has a vastly improved effect on the flow of oxygen into the bunker.

READ MORE...

Step 5 - Seal and Weight Step 4 - Protect Silostop film Step 1 - Side Wall Sheets Step 2 - Fill with Silage Step 3 - Cover Silage with Silostop film Step 4 - Protect Silostop film Step 5 - Seal and Weight Step 6 - Feed out
Home | About Us | Contact Us | Testimonials | Links | Site Map
© 2008 Bruno Rimini All rights reserved.
Site by ActiveBrand